Bespoke Rear Door Seal

28th November 2014 admin 2 Comments

A bespoke rear door seal retainer was made.

which was powder coated before fitting. A Land Rover rear mat was installed

A driver and passenger light console was fitted which light when the corresponding door is opened,

La Salle Panels……….

21st November 2014 admin Leave a comment

La Salle side panels were fitted to the inner sides, disappointed in their workmanship as they required tidying up and a lot of amending to fit correctly as did the roof trim…

La Salle roof liner fitted. A interior LED strip light was fitted for those dark evenings.

Tread Plate..

21st November 2014 admin Leave a comment

Tread Plate was fitted the inner bulkhead.

Rubber tread plate was fitted to the inner floor

Ex Moor Acoustic Moulded Matting System fitted

21st November 2014 admin Leave a comment

Ex Moor Acoustic Moulded Matting System fitted

Mud Stuff!!

20th November 2014 admin Leave a comment

A new Mud Stuff rear door card fitted.

The battery box had Dynomat & closed cell foam applied.

WOW!!!

20th November 2014 admin Leave a comment

All the body work was bolted together so the paint work could get polished.

All polished…but not the best lighting for the picture

The doors were fitted with new inner/outer handles, levers and glass channels. The bottom of each door was also sprayed with Ditonol to prevent rust and had a cavity wax oil sprayed in the lower door channels

Opted for a set of Masi solid tinted security glass

Opted for a set of Masi solid tinted security glass

Masi heated rear tinted glass. Dynomat and closed cell foam applied to the rear door. A heavy duty door dampener fitted to stop the door swinging closed with the spare wheel.

The wiring to the rear window wiper motor was sheathed in a braided cable tidy

New rubber grommets were used when threading the cable through the door

New rubber grommets were used when threading the cable through the door